Advertisement
6. Select
Search for a suitable driver for my
, then click
device (recommended)
The following screen appears.
7. Insert the supplied driver installation CD
in the CD-ROM drive and select
.
a location
8. Click
. The following screen
Next
appears.
9. Click
to select the file location.
Browse
The path is
(where F: is the
F:\WIN2000
CD drive).
10. Windows 2000 locates the driver and
the following screen appears.
11. Click
to continue. The Digital
Next
Signature Not Found screen appears.
12. Click
to continue the installation.
Yes
Windows 2000 automatically copies the
driver and related files into the
computer. The device installation is
complete after copying the driver files.
13. Click
. The orange PW indicator
Finish
.
lights and the following screen appears.
Next
14. Click
. The fax/modem is ready to
Finish
use. You can use an existing fax/
Specify
modem program or the supplied
SuperVoice software to send fax, email,
or surf the Internet. (See "Installing
SuperVoice" on Page 7).
9
"/'
+0&195
1. Turn on your computer.
2. Flip up the phone line jack cover on the
fax/modem and with locking tab facing
up, insert one end of the supplied RJ-11
cable plug into the phone line jack until
it clicks. Then connect the other end to
the telephone line wall jack.
3. Connect the fax/modem's USB plug to
your computer's USB port using the
supplied USB extension cable if
necessary. Windows ME recognizes the
device and Add New Hardware Wizard
screen appears.
4. Select
Specify the location of the driver
, then click
(Advanced)
following screen appears.
5. Insert the supplied driver installation CD
in the CD-ROM drive and select
for the best driver for your device
3
. The
Next
Search
Advertisement
