JVC KD-DV5306 Instructions Manual page 35

Symptom
• Longer readout time is required.
• Tracks cannot play back as you have intended
them to play.
• No sound can be heard when picture is
displayed while playing a DivX/MPEG Video
file.
• Elapsed playing time is not correct.
• "PLEASE" and "EJECT" appear alternately on
the display.
• Correct characters are not displayed (e.g.
album name).
• "NO DISC" appears on the display.
• "NO MAG" appears on the display.
• "RESET 8" appears on the display.
• "RESET 1" – "RESET 7" appears on the display. Press the reset button of the CD changer.
• The CD changer does not work at all.
• The iPod or D. player does not turn on or does
not work.
• The sound is distorted.
• "NO IPOD" or "NO DP" appears on the display. • Check the connecting cable and its connection.
• Playback stops.
• No sound can be heard when connecting an
iPod nano.
• No sound can be heard.
• "ERROR 01" appears on the display when
connecting a D. player.
Remedy/Cause
Readout time varies due to the complexity of the folder/
file configuration. Do not use too many hierarchies and
folders.
Playback order is determined when files are recorded.
• Record the audio track using MP3 or Dolby Digital as the
audio stream of DivX files.
• Record the audio track using MPEG1 Audio Layer 2 as
the audio stream for MPEG Video files.
This sometimes occurs during playback. This is caused by
how the tracks are recorded.
Insert a disc that contains tracks of appropriate formats.
This unit can only display letters (upper case), numbers,
and a limited number of symbols.
Insert a disc into the magazine.
Insert the magazine.
Connect this unit and the CD changer correctly and press
the reset button of the CD changer.
Reset the unit (see page 2).
• Check the connecting cable and its connection.
• Charge the battery.
• Update the firmware version.
Deactivate the equalizer either on this unit or the
iPod/D. player.
• Charge the battery.
The headphones are disconnected during playback.
Restart the playback operation (see page 20).
• Disconnect the headphones from the iPod nano.
• Update the firmware version of the iPod nano.
Disconnect the adapter from the D. player. Then, connect
it again.
Continued on the next page
REFERENCES 35