Radio Shack BTX-128 Owner's Manual page 27

19-1207.fm Page 27 Friday, November 10, 2000 11:04 AM
DIP Switch Setting
Channel Frequency
Number (MHz)
6 467.8750
7 467.9000
8 467.9250
7. Press once. If the DIP switch
MON
setting is correct, the transceiver
sounds a three-tone sequence. If the
DIP switch setting is incorrect, the
transceiver beeps once.
8. Turn the transceiver off then on.
Note: If you do not turn off the transceiv-
er to reset the power, the original fre-
quency setting remains unchanged.
If you want to set your transceiver to a
UHF business band frequency other than
Preparation
0 = down
1 = up
000110
000111
001000
27