Advertisement
To erase a programmed sequence during programming,
C;CEHO
C;CEHO
C;CEHO
C;CEHO
press
.
STOP
To erase a programmed sequence after programming,
press
Then press
PROGRAM.
To erase a programmed sequence at any time, press
, or press
CLOSE
POWER
-
#4#1-'
When a microphone is plugged into
system mixes the microphone output with recorded music
from CDs or CDGs. Rotate
listening level, and
between playback and microphone levels.
Rotate
to add depth and richness to vocals.
ECHO
5KPIKPI"#NQPI"9KVJ"#"%&1%&)"
1. Press POWER to turn on the system. The POWER
indicator turns on.
2. Load a CD/CDG in the CD compartment.
3. Set
AUTO VOICE
the music and original singer's voice. Whenever you
sing along, the original singer's voice is cancelled.
4. Press
PLAY/PAUSE
5. Adjust
MASTER VOLUME
6. Set the microphone's
to adjust the microphone's volume.
MIC VOLUME
7. Sing directly into the microphone along with the music.
8. Adjust
for the desired reverberation.
ECHO
9. When you finish, press
press
OPEN/CLOSE
remove the CD.
10. Set each microphone's
press
POWER
disappears.
C;CEHOý
C;CEHOý
C;CEHOý
C;CEHOý
.
STOP
.
MIC 1
MIC VOLUME
for the best balance
AUTO VOICE
to the desired position, to enjoy both
to start play.
to the desired level.
switch to
ON/OFF
on the CD/CDG. Then
STOP
to open the compartment door and
switch to
ON/OFF
to turn off the system.
disappears.
OPEN/
or
, the
MIC 2
to a comfortable
and rotate
ON
, then
OFF
7
Advertisement
