Mounting The Stations - Radio Shack 43-491 Owner's Manual

43-491.fm Page 5 Friday, August 13, 1999 9:58 AM

MOUNTING THE STATIONS

To mount a station on the wall, you need two screws (not
supplied) with heads that fit into the keyhole slots on the
bottom of the stations.
Follow these steps to mount a station on the wall.
1. Mark the mounting screw locations 2
(65.08 mm) apart, one above the other.
2. Drill a hole at each marked location.
3. Thread a screw into each hole until the screw's head
1
extends about /
8
4. Align the keyhole slots on the bottom of the station
with the screw heads in the wall, then slide the sta-
tion down to secure it.
inch from the wall.
9
/ inches
16
5