Table of Contents
Advertisement
●
Rear
6
7
8
9
6. Handle
7. Security lock slot
8. Main power switch
9. Power connector
10. Input signal connectors
11. Lock button
12. USB downstream port
(support for boost charging)
13. USB downstream port
14. Headphone jack
15. Cable holder
16. Stand
*2
*2 An optional arm (or optional stand) can be attached by removing the stand section (see
Optional Arm" (page
15
16
10
This handle is used for transportation.
Complies with Kensington's MicroSaver security system.
Turns the main power on or off.
Connects the power cord.
The following connectors are available on the monitor rear in order of left to
right.
HDMI connector (1)
HDMI connector (2)
DisplayPort connector
USB-C connector
Use this button to remove the monitor from the stand.
Connects to a peripheral USB device.
Connects to a peripheral USB device.
Connects to headphones.
Holds the monitor cables.
Adjusts the height and angle (tilt, swivel, and rotation) of the monitor.
31)).
11
12
13
14
: On,
: Off
(page
23)
"6-1. Attaching the
Chapter 1 Introduction
9
Advertisement
Table of Contents
