Playing The Prerecorded Tunes; Playing Back A Prerecorded Tune; Using Demo - Radio Shack MD500 Owner's Manual

3. Repeatedly press
VOLUME UP
to increase or decrease the
UME DOWN
volume.
Notes:
• The keyboard's volume ranges from 0
(no sound) to 10 (maximum), and the
current volume level appears on the
display. Each time you turn on the
keyboard, the volume is set to 6.
• To quickly return to the default vol-
ume setting of 6, turn the keyboard off
then back on.
4. To turn off the keyboard, set
. The POWER indicator turns off.
OFF
PLAYING THE
PRERECORDED TUNES
You can listen to any of the 50 tunes that
come prerecorded in the keyboard, or you
can turn off a tune's melody or accompani-
ment and play along on the keyboard.

Playing Back a Prerecorded Tune

1. Press .
SONG
the current tune appears.
Note: The keyboard always selects the
tune "Canon" (No. 01) each time you
turn it on.
2. Choose a tune from the SONGS list and
enter its two-digit number on the key-
pad.
Or, you can press
–
next higher or lower numbered tune.
Notes:
• Precede a single-digit number with a
0. For example,
("Wiegenlied (Schubert)"), press
6
or
VOL-
to
POWER
and the number of

Using DEMO

or to move to the
+
To play the prerecorded tunes one by one (in
order from the selected starting point), press
DEMO
to select 06
.
0 6
Operation
• If you enter an incorrect first digit,
repeatedly press
+
next higher or lower numbered tune.
3. Press to start playing the
START/STOP
tune.
You can change the tune by repeating
Step 2 even while a tune is playing. The
new tune immediately begins to play. As
it plays, the display shows:
• a "score" to show you the notes that
are playing (right side of the display)
• a "keyboard" to show you the finger-
ing and which keys are pressed (bot-
tom of the display)
• the black dots above the metronome
show the beat count in the measure
• the chord name (center left of the dis-
play)
Note: Each tune plays a different preset
tone for the melody.
4. Use to adjust the volume as
VOLUME
desired.
5. To change the tempo, repeatedly press
or
TEMPO UP TEMPO DOWN
tempo setting appears.
6. To select a different tune, repeat Step 2.
To stop the tune completely, press
.
START/STOP
. To stop the demo, press
or to move to the
–
. The current
again.
DEMO