Step Recording - Radio Shack MD-1600 Owner's Manual

42-4043.fm Page 35 Tuesday, August 3, 1999 6:51 AM
Notes:
• You can use layer and/or split during
memory playback.
• You can change the rhythm during
playback.
• Pressing
START/STOP
song resets it from the beginning.
• You can set the volume and pan
position of the playback tracks using
the mixer. This setting data is output
through .
MIDI OUT
• The entire keyboard functions as a
melody keyboard during playback,
regardless of the

STEP RECORDING

With step recording, you can record a
chord progression one chord at a time.
Before you start, read these tips. (If you
want to record one note at a time, refer
to "Recording Multiple
Page 37.)
• To start accompaniment with an
intro pattern, press
in Step 6 of "Step
CHRO/ENDING
Recording."
• To switch to a rhythm variation,
press
VAR/FILL-IN
before entering the chord in Step 6
of "Step Recording."
• To insert an ending or fill in, press
SYNCHRO/ENDING
( for variation rhythm)
IN VAR/FILL-IN
immediately before entering the
chord in Step 6 of "Step Recording."
during the
setting.
MODE
Tracks" on
after
INTRO SYN-
immediately
or
NORMAL/FILL-
• To step-record chords without a
rhythm, skip Step 5 of "Step Record-
ing." The chord of the specified
length is recorded. A rest can be
specified there, so you can create
an original chord pattern.
• To add chord accompaniment dur-
ing rhythm play, enter rests from the
beginning of the recording up to
where you want accompaniment to
start. Then enter only the chords (no
rests).
Follow these steps to record chords with
step recording.
1. Press
MEMORY
appears.
2. Within 5 seconds, use
select a song number.
3. Press to select Track 1.
CHORD/1
4. If desired, you can change these
settings:
• rhythm number
• tempo
• MODE
5. Press to start recording.
STEP
6. Press
SYNCHRO/ENDING
a chord.
• Use the chord play method deter-
mined by the current
ting (Fingered, Concert Chord,
Full Range Chord, or Normal).
until REC.No.
or to
+ –
, then play
set-
MODE
35