Sharp PN-L705H Operation Manual page 39

nDual screen display
You can display two screens simultaneously.
Set this function with "PIP MODES" in the MULTI/PIP menu.
PIP
Main screen
Sub
screen
PbyP
Main
screen screen
PbyP2
Main screen
* The currently selected input signal is displayed on the main
screen.
* The following combinations are available for display:
DisplayPort1 - DisplayPort2
DisplayPort1 - HDMI1, HDMI2, HDMI3
DisplayPort1 - D-SUB[RGB]
DisplayPort1 - D-SUB[COMPONENT]
DisplayPort1 - OPTION
DisplayPort2 - HDMI1, HDMI2, HDMI3
DisplayPort2 - D-SUB[RGB]
DisplayPort2 - D-SUB[COMPONENT]
DisplayPort2 - OPTION
HDMI1 - HDMI2, HDMI3
HDMI2 - HDMI3
HDMI1, HDMI2, HDMI3 - D-SUB[RGB]
HDMI1, HDMI2, HDMI3 - D-SUB[COMPONENT]
HDMI1, HDMI2 - OPTION
D-SUB[RGB], D-SUB[COMPONENT] - OPTION
TIPS
• You might infringe on a copyright of the author which is
protected by copyright law when you display the images of
the computer screen and television/VCR simultaneously for
profit-making or to show the image to the public.
• The screen size for dual-screen display is the same as
the screen size for single-screen display. The Dot by Dot
screen is displayed in NORMAL size except when it is set
as the PIP main screen.
• When dual-screen display is selected, the CONNECT
AUTO INPUT SELECT function and NO SIGNAL AUTO
INPUT SEL. function are disabled.
• When dual-screen display is selected, the INPUT SELECT
options cannot be set.
• When dual-screen display is selected, the AUDIO menu
cannot be set.
• When an interlaced signal (1080i, 480i, video) is input to
the sub screen, horizontal lines may flicker. If this happens,
display the image on the main screen.
• Touch operation cannot be used in the sub screen.
• When DisplayPort STREAM is set to MST, you cannot set
PIP MODES to PIP, PbyP, or PbyP2.
• When HDMI CEC LINK is set to AUTO, SOUND CHANGE
on the PIP/PbyP may be changed to MAIN due to the
switching of the monitor's input or due to the operation of
the HDMI-connected device.
A sub screen is displayed
inside a main screen.
A main screen and a sub
screen are displayed in a
Sub
line.
Displays a main screen
which measures 2560
Sub
pixels in the longest
screen
direction and a sub
screen in a line.
nQuad screen display
You can display four screens simultaneously.
Landscape orientation
Position 1 Position 2
(1920×1080) (1920×1080)
Position 3 Position 4
(1920×1080) (1920×1080)
Displaying 4 screens
1. Touch the TOUCH MENU button, and touch the QUAD-
SCREEN ON icon ( ).
Or, set CONFIGURE QUAD-SCREEN – QUAD-SCREEN
MODE to ON in the MULTI/PIP menu.
• The four screens set in SETTING INITIAL SCREEN
appear.
• When SAVE LAST INPUT CONFIG. is ON, the
previously displayed four screens appear.
• You can return the quad-screen display to the four
screens set in SETTING INITIAL SCREEN using
RECONFIGURE QUAD-SCREEN in the touch menu,
or CONFIGURE QUAD-SCREEN – RECONFIGURE
QUAD-SCREEN in the MULTI/PIP menu.
Deciding the screen that will be the audio output/input
mode selection target
Set the screen whose audio is output, and the screen whose
input is changed.
1. Press and hold the screen you want to be the target.
Or, set in CONFIGURE QUAD-SCREEN – TARGET:
SOUND / INPUT SEL. in the MULTI/PIP menu.
Returning to single screen
1. Touch the TOUCH MENU button, and touch the QUAD-
SCREEN OFF icon ( ).
Or, set CONFIGURE QUAD-SCREEN – QUAD-SCREEN
MODE to OFF in the MULTI/PIP menu.
• The screen set in TARGET: SOUND / INPUT SEL. is
displayed on screen 1.
Menu Items
Portrait orientation
Position 1 Position 2
(1920×1080) (1920×1080)
Position 3 Position 4
(1920×1080) (1920×1080)
39
E