Radio Shack FLATFOTO B-020405 Owner's Manual page 48

Problem
The PC does not
Connect the camera to the PC with the
recognize the camera.
USB cable before installing the software.
Everything on the LCD
Camera firmware defect.
flashes and " " or " "
is displayed.
Cause
Connect the camera to the PC with the
USB cable and select [My Computer]
[Control Panel]
Manager]. In the [Devise Manager]
window, delete [Compose USB device]
or [Unknown device] in [Other devices].
Then disconnect the camera and install
the software before reconnecting the
camera to the PC.
Connect the camera directly to the PC
using the USB cable, not via a USB hub.
Disconnect the other USB devices
connected to the PC.
If the "Camera firmware is out of sync.
Update recommended. Update firmware?"
message appears when you connect the
camera to your PC with the USB cable,
click the [Yes] button and update your
firmware.
Remedy
[System] [Device