Radio Shack ET-925 Owner's Manual page 13

900 mhz dual keypad cordless speakerphone
Table of Contents

Advertisement

43-1095.fm Page 13 Tuesday, August 17, 1999 3:37 PM
To connect the headset, pull open the
rubber cover marked
the handset, then insert the headset's
3
/
-inch (2.5 mm) plug into the jack.
32
Notes:
• Connecting a headset discon-
nects the handset's earpiece and
microphone.
• You can still use the speaker-
phone after connecting a headset.
on the handset also con-
VOLUME
trols the connected headset's vol-
ume.
• If you place the handset on the
base to recharge it while the
headset is connected, be sure the
handset seats properly.
With a headset connected, you can
make or answer calls as usual using
the keys on the handset.
When you finish using the headset,
disconnect it from the handset and
close the rubber cover to protect the
jack.
on the side of
13

Advertisement

Table of Contents
loading

Table of Contents