Table of Contents
Advertisement
20
Basic use
4
To enter a pinyin syllable or the initial
of the next character, select the
relevant keys.
5
If necessary, repeat the steps.
6
Select the desired pinyin
combination.
7
Select the desired phrase.
Stroke input method
The strokes constituting Chinese
characters have been divided into five
categories: horizontal, vertical, left-
falling, dot, and turning. Each category
corresponds to a number key from 1 to 5,
respectively.
The strokes are classified as follows:
Enter a character
1
To enter the strokes, select the
relevant keys in the standard stroke
order.
If you are not sure which stroke to use
or which category it belongs to, select
6 to substitute that stroke, then
continue with the subsequent
strokes. A question mark in the input
area represents that stroke.
2
Select the desired character.
Enter a phrase
1
To enter the first strokes of the first
character, select the relevant keys.
2
To insert a separator, select 0.
3
To enter the first strokes of the next
character, select the relevant keys.
4
If necessary, repeat the steps.
5
Select the desired phrase.
Activate traditional text input with the
virtual keypad
Quickly select # twice.
Enter a character
1
Select a number key (1-9) repeatedly,
until the desired character is
displayed. There are more characters
available than are visible on the key.
2
If the next letter is located on the
same key, wait until the cursor is
displayed or move the cursor forward,
and select the key again.
Insert a space
Select 0.
© 2011 Nokia. All rights reserved.
Advertisement
Table of Contents
