Table of Contents
Advertisement
Enter a character
Write the character upright on the input
area, and select from the displayed
candidates.
Enter a special character
Select
and the desired character. Or,
write the character as you would normally
write it, and select from the displayed
candidates.
Change the character range
Select the current character range icon,
and select the desired character range
from the drop-down list.
Tip: All Chinese and English characters can
be found in the default character range
(
). To enter only English letters or
numbers, select
Use handwriting gestures
Draw gesture 1 for backspace, gesture 2
for space, or gesture 3 for enter.
Enter text with virtual keypad
Activate the virtual keypad
You can use the virtual keypad to enter
characters as you would with a traditional
keypad.
1
Turn your phone so it is vertical.
© 2011 Nokia. All rights reserved.
or
.
2
If handwriting mode is activated,
select
>
The current text input mode is indicated
above the number keys.
Switch between text input modes
Select the text input mode indicator and
the desired text input mode.
The available input methods depend on
where the phone is sold.
Pinyin input method
Pinyin symbols are mapped to the number
keys. Select each key once, regardless of
the position of the symbol on the number
key. The phone makes logical
combinations of the pinyin symbols.
Enter a character
1
For each pinyin symbol that you want
to enter, select the relevant key once.
Use v for ü.
2
To insert a tone mark, select 声调
repeatedly, until the desired tone
mark is displayed.
3
If necessary, select the desired pinyin
combination.
4
Select the desired character.
Enter a phrase
1
To enter a pinyin syllable or the initial
of the first character, select the
relevant keys. Use v for ü.
2
To insert a tone mark, select 声调
repeatedly, until the desired tone
mark is displayed.
3
To insert a separator, select 0.
Basic use
Alphanumeric
keypad.
19
Advertisement
Table of Contents
