Pioneer DVR-LX61D Service Manual page 75

5
[4] Diagnosis Procedures
1
Display the menu on the screen.
The menu indicated below is displayed when the diagnostic program is started. To enter each mode, press the
corresponding key "1"-"4" on the remote control unit for servicing.
2
Check the HDD information.
Press the "1" key on the remote control unit for servicing. Check the following data:
Model: Is the correct model name of the HDD displayed?
Recog. No: Is a positive value displayed?
SMART threshold: Is "not exceeded" displayed?
To return to the menu screen, press the "Clear" key.
5
http://getMANUAL.com
6
Tests to be executed
1
HDD Information:
Check of the HDD information
2
S.M.A.R.T. DST:
Executing a simplified test or a reading test of all data
3
HDD R/W Check:
Executing a writing/reading test of all data. All data on the
HDD will be erased if this test is executed.
Note: "2. S.M.A.R.T. Attribute . . ." is not to be used.
Detailed description
1
Model:
For the correct model name, refer to the display of the unit.
2
Recog. No:
Positive value: The HDD has been authenticated.
Negative value: The HDD has not been authenticated.
3
SMART threshold:
exceeded: The HDD has come to the end or near the end of
not exceeded: The HDD has not reached the end of its
DVR-LX61D
6
7
its service life.
service life.
7
8
A
B
C
D
E
F
75
8