Honda Element 2006 Reference Owner's Manual page 206

Main Menu
Lights
Replacing a High-mount Brake
Light Bulb
TAB COVER
1. Open the hatch. Remove the light
assembly cover by pushing in on
the tabs on both sides and pulling
the cover down.
2. Remove the socket from the light
assembly by turning it one-quarter
turn counterclockwise.
184
Table of Contents
TAB
SOCKET
3. Pull the bulb straight out of its
socket. Push the new bulb straight
into the socket until it bottoms.
4. Test the lights to make sure the
new bulb is working.
5. Put the socket back into the light
assembly, and turn it clockwise to
lock it in place.
6. Put the cover back onto the light
assembly. Push it on until it locks
in place.
BULB