Table of Contents
Advertisement
Main Menu
Installing a Child Seat with
LATCH
ANCHOR COVER
Your vehicle is equipped with
LATCH (lower anchors and tethers
for children) in the rear seats. The
lower anchors are located between
the seat-back and seat bottom, and
are to be used only with a child seat
designed for use with LATCH. The
location of each lower anchor is
marked with a small button above
the point.
Table of Contents
MARKS
To install a LATCH-compatible child
seat:
1.
Remove both anchor covers by
pulling forward.
2.
Make sure there are no objects
near the anchors that could
prevent a secure connection
between the child seat and the
anchors.
Installing a Child Seat
Rigid-type
3.
Place the child seat on the vehicle
seat, then attach the seat to the
lower anchors according to the
child seat maker's instructions.
Some LATCH-compatible seats
have a rigid-type connector as
shown above.
CONTINUED
39
Advertisement
Chapters
Table of Contents
