Table of Contents
Advertisement
3. Press UP or DOWN
to select DIALED. Press OK to delete.
4. Press OK to confirm.
Other Features
3.6.1
Lock keypad
Keypad can be locked to prevent accidental key press. When the keypad is locked, you can still
answer an incoming call by pressing the
When the call is ended, the keypad will be locked again.
1. Press and hold
during standby. When locked,
2. Press the UNLOCK key to unlock the keypad. Press OK to confirm.
NOTE: When a call comes in, your keypad will become active. When you end the call, your
keypad will be locked again.
Paging
You can locate the handsets by using this feature.
1.
Press the
key on the base.
Note: All handsets registered to the base will produce the paging tone for 30 seconds and the
screen displays PAGING.
If an external call comes in, all the handsets will stop paging, and play the external call melody.
Stop the paging
You can stop the paging by pressing the STOP softkey or END key on each handset or
pressing the
key on the base again.
Not ringing?
A handset will not play the paging melody if it is powered off or in mode other than standby
mode; however, all the other handsets will still ring.
CID first ring suppression
If you have subscribed for CallerID service, your phone will suppress the first ring before the
CID. After resetting, first ring suppression will be deactivated. Your phone will automatically
detect if CID service is subscribed after the first call. If CID service is detected, your phone will
start suppressing the first ring after the first call.
Note: Once first ring suppression is activated, the first ring before CID will be suppressed even
after you have unsubscribed the CID service. If you have unsubscribed the CID service and do
not wish to have the first ring suppressed, please power recycle the base.
Switch on/off the handset
1. To switch off your phone, press and hold
2. To switch on the power of your phone, press
handset should be automatically turned on.
TALK key. During the call, the keypad is active.
will appear on the display.
while the phone is on.
or return the handset to the charger; the
Personalizing your sounds
You can assign different ringing melodies for each handset at different volume levels.
You can select a different ringtone for Windows Live Messenger, Telephone and intercom calls.
Selecting your handset's ringing volume/melody
Press the MENU.
Press UP or DOWN
to select SOUNDS and press OK.
Select HANDSET and press OK.
Press LEFT or RIGHT
to adjust the ringer volume. Press DOWN to select the Telephone line
melody.
Press LEFT or RIGHT
to select a melody for the telephone line; press DOWN to select the
Windows Live Messenger line melody.
Press LEFT or RIGHT
to select the Windows Live Messenger line melody; press DOWN the
select the internal line.
Press LEFT or RIGHT
to select the internal line.
Press OK to save the settings.
Shortcut for turning handset ringer on/off
You can use this shortcut to turn on/off the handset ringer.
Press and hold the
key.
Note:
appears to indicate the ringer is turned off. The handset will not emit any sound for any
incoming call.
Set key tones on/off
Press MENU.
Press UP or DOWN
to select SOUNDS and press OK.
Press UP or DOWN
to select HS KEY TONES and press OK.
The current setting will be shown. Press UP or DOWN
Press OK to save the settings.
Rename handset
You can give your phone a different name. If you have more than one handset, you can give each
handset its own name.
The handset name can be up to 10 characters long and it can be composed of A-Z, 0-9, and space.
Press MENU.
1. Press UP or DOWN
to select DISPLAY and press OK.
2. Press UP or DOWN
to select HANDSET NAME and press OK. The current handset
name is displayed.
3. Edit the handset name.
4. Press OK to save the settings.
Set date & time
to select ON or OFF.
Advertisement
Table of Contents
