A Quick Look At The Handset; Setting The Dialing Mode - Radio Shack 900 MHz Digital Spread Spectrum Dual Keypad Cordless Telephone with Caller ID/Call Waiting ID Owner's Manual
Radioshack sprint 900 mhz digital spread spectrum dual keypad cordless telephone with caller id/call waiting id owner's manual
Table of Contents
Advertisement
43-5520.fm Page 11 Friday, July 21, 2000 8:01 AM
A QUICK LOOK AT THE HANDSET
Note: The handset window has a plastic film on it to protect it during shipment. Carefully peel
off the film before using your phone for the first time.
Use TALK to make a
call (see "Making and
Receiving
Page 13).
Press FLASH to use
the
phone's
function (see "Using
Flash" on Page 15).
6 6 6 6
Press
TONE
to use your phone
*
company's special tone services on
a pulse line (see "Using Tone Ser-
vices on a Pulse Line" on Page 15).
Use MEM to store or recall
names and numbers in memory
(see
"Memory
Dialing"
Page 16).
SETTING THE
DIALING MODE
Set
on the back of the base for
DIAL MODE
the type of service you have. If you are not
sure which type you have, once the battery
pack is fully charged, do this test.
1. Be sure
DIAL MODE
Calls"
on
flash
on
Press RDL/PAUSE to select a phone
number so you can redial it (see
"Using Redial" on Page 14) or store
a pause in a number (see "Entering
a Pause" on Page 18).
is set to
(tone).
T
Installation
Press VOL/CID
the handset volume (see "Adjusting
the Handset Volume" on Page 13),
set the ringer tone/volume (see
"Setting the Ringer Tone/Volume"
on Page 12), view Caller ID records
(see
"Caller
Page 19), or select options.
Use CALL ID to review
the Caller ID records.
Press INTCM to page someone at
the base or transfer a call to the
base (see "Using Page/Intercom" on
Page 15).
Press MENU to use the telephone
company's network service (see
"Using the Phone Company's Net-
work Service" on Page 21).
Press DEL to Delete Caller ID
records (see "Deleting Caller
ID Records" on Page 20) or to
erase information if you make
a mistake.
Press SELECT/CHANNEL to
select the phone's channels
(see "Selecting the Channel"
on Page 13) and other options.
2. Lift the handset, press
for a dial tone.
3. Press any number except 0.
Note: If your phone system requires that
you dial an access code (9, for example)
before you dial an outside number, do
8 8 8 8
9 9 9 9
or
to adjust
ID
Operation"
on
, and listen
TALK
11
Advertisement
Table of Contents
