Sim Card And Battery - Pantech EDGE C530 User Manual

SIM card and battery

About your SIM card
When you subscribe to your network operator, you receive a SIM
(Subscriber Identity Module) card containing your registration information,
PIN code, etc.
Like a credit card, it should be kept secure and handled carefully. Do not
bend, scratch or expose it to moisture. Avoid static electricity.
To avoid corrupting your SIM card's memory, always switch off your phone
before removing or inserting your SIM card
About your battery
Your phone uses a Li-Ion battery. Make sure to use an authorized battery
and charger only. For more details, please inquire at your nearest dealer.
NOTE: Your phone is powered by a Lithium Ion (Li-Ion) battery. This means
that, unlike other forms of battery technology, you can recharge your
battery while some charge remains without reducing your phone's
autonomy due to the "battery memory effect" inherent in those technologies.
Installing/removing SIM card and battery
1. Remove the battery cover from the unit. To fit the battery cover, put it
on the guide rail and push up.
2. Insert the SIM card first into the slot. The gold
contacts of the SIM card should go against the metal
contacts of the phone. After inserting the SIM card,
put the contacts of the battery into the hole located at the
right of the unit (1) and press the left side(2) of the battery
until you hear the "click".
3. To remove the battery pull the left side of the battery to
upwards(1) and remove(2) the battery. After removing the
battery, remove the SIM card in the arrow direction as shown.
NOTE: Data will be loose if the SIM card is removed
while the phone is turned on.
To charge your battery
1. To charge, open the protective cover on the top left side
and connect the charger adapter.
2. To remove the adapter connection press the adapter's
side buttons(1) and pulling the adapter away(2).
2
1
1
2
2
1
1