Making Calls With Memory Dialing; Memory Dialing From Standby Mode; Memory Dialing From Talk Mode; Chain Dialing - Radio Shack 43-3558 Owner's Manual

M C
AKING
M D
EMORY
Memory Dialing from Standby
Mode
1. Press
MEM
programmed memory locations.
2. Press
VOL
the number (
location you would like to dial. Ô
3. Press
TALK/FLASH
volume setting appear on the display.
Then the displayed number is dialed. Ô

Memory Dialing from Talk Mode

1. Press
TALK/FLASH
volume setting appears.
2. Press
MEM
3. Press
VOL
number ( -
0
location of the desired phone number.
The selected name is displayed. Ô
4. The phone number in the memory will
be dialed when
5. To hang up, press
C D
HAIN IALING
The memory locations on the handset are
not limited to phone numbers. You can also
store a group of numbers (up to 20 digits)
that you need to enter once your call
connects. This is referred to as Chain
Dialing.
ALLS WITH
IALING
. The handset displays your
or keys, or enter
VOL
- ) to select the memory
0 9
Talk
. ¨ ¨ and the
Talk
. ¨ ¨ and the
.
or keys or enter a
VOL
) to select the memory
9
is pressed.
SELECT
.
END
Ô
NOTES
Memory Dialing from
Standby Mode
• If you press SELECT
before TALK/FLASH,
you can confirm the
name and the number
stored in the selected
memory location.
• To exit the memory
function without dialing,
press END. The
handset returns to the
standby mode.
• Whenever you are
using a memory menu
screen, you must press
a key within 30 seconds
or the phone will return
to the standby mode.
Memory Dialing from
Talk Mode
If you select a memory
location that does not have
a stored number, the
phone will not dial.
Ô
23