Table of Contents
Advertisement
A
The Built-in Flash
If additional lighting is required for correct
exposure in i mode, the built-in flash will
pop up automatically when the shutter-
release button is pressed halfway (0 87). If
the flash is raised, photographs can only be
taken when the flash-ready indicator (M) is
displayed. If the flash-ready indicator is not
displayed, the flash is charging; remove
your finger briefly from the shutter-release
button and try again.
When the flash is not in use, return it to its
closed position by pressing it gently
downward till the latch clicks into place.
A
Live View Zoom Preview
To magnify the view in the monitor up to about 8.3 × for precise focus,
press the X button. While the view through the lens is zoomed in, a
navigation window will appear in a gray frame at the bottom right
corner of the display. Use the multi selector to scroll to areas of the
frame not visible in the monitor, or press W (Q) to zoom out.
38 Basic Photography and Playback
X button
Navigation window
Advertisement
Table of Contents
