Samsung RMC-QTD1 Manual

To use QWERTY side of the remote, the TV should be updated by USB or Online.
•
Before using QWERTY Remote, it should be paired with TV.
•
Update TV
Using USB
¾
1. Download the latest TV software at www.samsung.com and extract it to the USB using your PC.
2. Turn on the TV, and then insert the USB into the USB port of the TV.
3. In the TV's menu, go to Support → Software Upgrade and select " By USB ".
4. The TV upgrades the software, turns off, and then turns on automatically.
On screen menu
¾
1. Connect your TV to internet network.
2. In the TV's menu, go to Support → Software Upgrade and select " By Online ".
3. If there is a download available, the Download pop-up appears with a progress bar and the download starts.
4. When the download is complete and the Upgrade Query screen appears, select Upgrade Now .
5. The TV upgrades the software, turns off, and then turns on automatically.
✎ For more detail information, refer to the e-Manual.
✎
Initial Pairing
1. When the user inserts batteries into the QWERTY Remote, "NEED PAIRING PRESS SYM+TAB" will be displayed
on the screen.
2. Press SYM and TAB
The TV can be paired with only one QWERTY remote. Start the pairing process approximately 30 seconds
✎
after turning on the TV.
Keep within 20 inches(50 cm) between the QWERTY Remote and the TV.
✎
Performing the Pairing Process Again
• Press and
SYM TAB
The TV can be paired with only one QWERTY remote. Start the pairing process approximately 30 seconds
✎
after turning on the TV.
Keep within 20 inches(50 cm) between the QWERTY Remote and the TV.
✎
Inserting Batteries
1
y Slide out the battery cover.
3
y Pull the battery tray out.
Model Name
Battery
Dimension(WxDxH)
Weight
Compatibility
※
The user shall bear the full costs of any necessary software upgrade for the TV. The TV can be exchanged or
refunded only when it has a problem. If there is a problem with the QWERTY Remote, only the remote can be
exchanged.
[SA]QWERTY-Remote.indb 1
QWERTY Remote (RMC-QTD1)
LED TV Series : D6500 and above
PDP TV Seires : D8000
buttons at the same time more than 2 seconds.
buttons at the same time more than 2 seconds.
Specifications - QWERTY Remote
To extend the battery life, use of alkaline battery is recommended.
2
y Push the button right.
4
y Insert 4 AAA batteries in the tray, insert the battery tray
into the QWERTY Remote and put the cover back on.
RMC-QTD1
AAA x 4
2.4 X 1.0 X 6.0 inches
(60.9 x 24.36 x 152.2 mm)
0.295 lbs (134 g)
LED TV Series : D6500 and above
PDP TV Seires : D8000
2011-05-02 오후 3:45:04