HP 3100 v2 Series Configuration Manual page 24

Switching to a higher user privilege level
Before you switch to a higher user privilege level, obtain the required authentication data as
described in
The privilege level switching fails after three consecutive unsuccessful password attempts.
To switch the user privilege level, perform the following task in user view:
Task
Switch the user privilege level.
Table 8 Information required for user privilege level switching
User
interface
authenticatio
n mode
none/passwor
d
scheme
Table 8.
Command
super [ level ]
User privilege
level switching
authentication
mode
local
local scheme
scheme
scheme local
local
local scheme
scheme
Information required
for the first
authentication mode
Password configured on the
device with the super
password command for the
privilege level.
Password configured on the
device with the super
password command for the
privilege level.
Username and password for
the privilege level.
Username and password for
the privilege level.
Password configured on the
device with the super
password command for the
privilege level.
Password configured on the
device with the super
password command for the
privilege level.
Password for privilege level
switching that is configured
on the AAA server. The
system uses the username
used for logging in as the
privilege level switching
username.
18
Remarks
When logging in to the device, a
user has a user privilege level,
which depends on user interface
or authentication user level.
Information required for
the second authentication
mode
N/A
Username and password
configured on the AAA server
for the privilege level.
N/A
Local user privilege level
switching password.
N/A
Password for privilege level
switching that is configured on
the AAA server. The system
uses the username used for
logging in as the privilege level
switching username.
N/A