Axis Ip Utility - Single Camera/Small Installation; Automatic Discovery - Axis 207 Installation Manual

AXIS 207/207W/207MW Installation Guide

AXIS IP Utility - single camera/small installation

AXIS IP Utility automatically discovers
and displays Axis devices on your
network. The application can also be used
to manually set a static IP address.
Note that the computer running AXIS IP
Utility must be on the same network
segment (physical subnet) as the AXIS
207/207W/207MW.

Automatic discovery

1. Check that the AXIS 207/207W/
207MW is connected to the network
and that power has been applied.
2. Start AXIS IP Utility.
3. When the camera appears in the window, double-click it to open its home page.
4. See page 12 for instructions on how to set the password.
Set the IP address manually
1. Acquire an unused IP address on the same network segment your computer is connected
to.
2. Click the button
and IP address for the AXIS 207/207W/207MW. The serial number is located on the
product label.
3. Click the Set IP button and follow the instructions.
4. Click View Home Page button to access the camera's web pages.
5. See page 12 for instructions on how to set the password.
Set IP address using serial number and enter the serial number
Page 9