Amprobe LT-10 User Manual page 10

Test Functions and Indications:
Test
Lamp test
Pin test
Non-contact voltage
Attaching the Antenna
Make sure the switch is securely locked onto the probe before use.
Removing the Antenna
1
Press and hold down the switch to unlock.
2 Remove the antenna from the probe.
Removing the antenna in a manner not specified in this manual may cause
damages to the instrument and protection provided by the instrument may
be impaired.
Indication
Visual
LED on
LED on
LED flashing
Figure 1: Attaching the antenna
Figure 2: Removing the antenna
Switch
2
1
6
Audio
None
Solid tone
Modulated beep