Attaching The Take-Up Roll Core To The Auto Take-Up Reel - Epson SureColor F9370 User Manual

You can use the auto take-up reel for media with the printable side in (on the left) or printable side out
(on the right).
It is best to do the following when using the auto take-up reel:
• Use media that is 36 inches (91.44 cm) or wider.
• Load media with the printable side in.
• Use a take-up roll core that is the same width as your media so the core does not bend or take up
media incorrectly.
Parent topic: Using the Auto Take-up Reel

Attaching the Take-up Roll Core to the Auto Take-up Reel

Be sure to attach a take-up roll core that is the same width as your media.
1. Press and hold the down arrow button until the edge of the loaded media reaches the roll core
holder.
53