VuQube Vu Qube V10 Installation And Operating Manual page 7

Installation
Mounting the bracket and selecting location to run wiring
using Mounting Bracket Kit part number 31100. This Mounting Bracket Kit
and others were designed specifically to mount the Vu Qube to the back
of a truck cab. Please contact Wallace Technologies, LLC (866-802-2228)
regarding other bracket options.
1. Select and mark both area on back of cab to mount the bracket
AND location to run coaxial cable from the Vu Qube to the inside of
the cab.
coaxial cable.
so that the antenna can receive adequate signal. The clearance of the
Vu Qube is important because the antenna requires a direct line of
sight to the satellite in the southern sky to acquire a clear signal.
to height restriction, install with the maximum available clearance. With less
of the Vu Qube top cover above the cab, there may be difficulty acquiring
satellite signal in the Northeastern US (Maine, New Hampshire, Vermont
and Massachusetts).
to be mounted.
wiring so that the co-axial cable does not
have a sharp bend.
conditioning units may interfere with satellite signal or prevent the
satellite signal from reaching the Vu Qube.
directly to the frame (i.e. Headache Rack) will void the warranty.
Vu Qube
(continued)
of Vu Qube is above the highest part of the roof
wide space
7
above the cab due
V10-6/1007