Battery Recharging - Craig CRT713 Owner's Manual

PREPARATIONS:

Battery Recharging:

The unit has a built-in DC 3.7V Li-ion rechargeable battery, recharge it before first time
use or when it is consumed as follows:
1. Open the battery door by slide it out then lift up.
2. Take out the battery from the battery compartment. Connected the small jack from
the supplied USB Charging Cable to the connection plug of the battery.
3. Connected the full size USB Plug from the supplied USB Charging Cable to any
Computer or USB Charger having DC 5V output as the figure below:
4. During charging, the charging indicator on the full size USB Plug will illuminate.
When finished, it will turn off.
5. Disconnect the battery from the Computer or USB Charger.
Connect to any Computer or
USB Charger
(Computer and USB Charger
not included)
4