Wiring Connections - Axis 25734 Product Instructions

Axis communications network cameras product instructions

Hide thumbs Also See for 25734:

Product instructions (12 pages)

Table of Contents

Installing Axis 231D/232D Camera

7. Then start (3) 8-32x3/8" phillips head screws onto the (3) ½" spacers inside

the housing. Be sure to place the screws so that they line up with the (3)

open slots on the quick release bracket, the screws on the bottom of the

camera, see diagram below.

(3) 8-32 x 3/8"screws

8. Locate the connector block,

which is included with the

camera. Then located the

connector block bracket,

which is included with the

housing. Attach the block

to the bracket as shown

in the following diagram.

Use the M3 screws

and washers that are

located in the housing

packet.

9. Attach the connector

block assembly to the

housing using (1) 6-

32x3/8" screw and star

washer located in the

housing packet.

(cont.)

10. Make wiring connections to connector block assembly per

camera instructions.