Converting the Modular Keyboard to a Wireless Solution
6. To continue with this procedure:
❏
❏
7. If the modular keyboard was previously used in a
non-wireless mode, disconnect the USB cable from the
modular keyboard and computer.
8. Insert the Bluetooth transceiver into a USB receptacle on the
computer.
✎
Your computer may look different than the one shown in the
illustration below.
Connecting the Bluetooth Transceiver
9. Turn on the computer if it is not already on.
5–12
If the computer is turned off, or if the pre-installed
operating system has not been unbundled, proceed to
step 7.
If the computer is turned on and the Microsoft Windows
operating system is completely installed and running,
proceed to the
section.
www.hp.com
"Installing the Bluetooth Software"
User Guide