Table of Contents
Advertisement
Chapter 2 Hardware Installation
Static electricity can severely damage electronic parts. Take these precautions:
Before touching any electronic parts, drain the static electricity from your body.
You can do this by touching the internal metal frame of your computer while
it's unplugged.
Don't remove a card from the anti-static container it shipped in until you're
ready to install it. When you remove a card from your computer, place it back
in its container.
Don't let your clothes touch any electronic parts.
When handling a card, hold it by its edges, and avoid touching its circuitry.
Before You Begin
Before you process further, make sure your computer system meets the peripheral
requirements and switch to the standard VGA display driver.
Prepare Your Computer for Installation
Prior to working on your computer, make sure the power of the computer and any
related equipment is turned off.
Select a Vacant Expansion AGP (PCI) Slot
Most computers have a combination of AGP, PCI and ISA expansion slots. AGP
slots are usually made from plastic of a contrasting brown color (beige color), and are
shorter than other slots in your computer. Your system manual should identify the
AGP or PCI slots, as appropriate for your model. Plugging your Graphic card into
an incorrect slot could damage the card, your computer, or both. Do not try to force a
card into a slot that does not accommodate it, as it is probably the wrong slot.
Back of
computer
AGP vs. PCI vs. ISA expansion slots
3
AGP slot
PCI slot
ISA slot
Advertisement
Table of Contents
