Mounting The Soundbar - JBL PSB-1 Owner's Manual

Mounting the Soundbar

TABLE-MOUNTING THE SOUNDBAR
Remove the Rubber Plugs.
Tighten the 2 X M5 Mounting Screws (included)
on the soundbar.
Page 12
Mounting the Soundbar
Table Mount Procedure
There is a gap in the rubber surrounding the screws.
Ensure this gap is facing upwards, and then slide the
secured Mounting Screws onto the Mounting Brackets.
Tighten the bracket on the table
using 4 X M4 screws (the distance
between two brackets should be
406mm (16 inches)).
PSB-1 Owner's Manual