Carrier 50ZP024 Installation Instructions Manual page 2

11.57
[408.0]
[294.0]
9.75
[247.6]
UNIT
50ZP024
50ZP030
50ZP036
16.06
14.0 DIA.
[356.0]
50.98
[1295.0]
Fig. 2 - - Base Unit Dimensions, 50ZP024- -036
ELECTRICAL CHARACTERISTICS
208/230- -1- -60
208/230- -1- -60
208/230- -1- -60, 208/230- -3- -60
REQUIRED CLEARANCE TO COMBUSTIBLE MA TL.
TOP OF UNIT.........................................................................................0
DUCT SIDE OF UNIT.............................................................................0
SIDE OPPOSITE DUCTS ......................................................................0
BOTTOM OF UNIT .................................................................................0
NEC. REQUIRED CLEARANCES.
BETWEEN UNITS, POWER ENTRY SIDE ....................................42.00 [1066.8]
UNIT AND UNGROUNDED SURFACES, POWER ENTRY SIDE .36.00 [914.0]
UNIT AND BLOCK OR CONCRETE WALLS AND OTHER
GROUNDED SURFACES, POWER ENTRY SIDE.........................42.00 [1066.8]
REQUIRED CLEARANCE FOR OPERATION AND SERVICING
CONDENSER . COIL ACCESS SIDE..............................................30.00 [762.0]
POWER ENTRY SIDE....................................................................30.00 [762.0]
(EXCEPT FOR NEC REQUIREMENTS)
UNIT TOP .......................................................................................48.00 [1219.2]
SIDE OPPOSITE DUCTS ..............................................................30.00 [762.0]
LEGEND
NEC – National Electrical Code
NOTES:
1. Clearances must be maintained to prevent recirculation of air from outdoor-
fan discharge, with the exception of the condenser coil (36.00 in [914.0 mm]. A
removable fence or barricade requires no clearance.
2. Dimensions are in inches. Dimensions in [ ] are in millimeters.
31.99
[812.5]
2.72
[69.0]
1.75 DIA.
[44.5]
17.60
[447.0]
1.20
[30.6]
1.0540 I.D x .50 DEEP
[26.772 x 12.7]
UNIT WEIGHT
lb kg
219 99
(14.00)
226 103
(14.00)
234 106
(14.00)
2
INCHES [mm]
INCHES [mm]
INCHES [mm]
21.61
[594.0]
0.88 DIA.
[22.2]
19.61
2.50
[498.1] [63.5]
C00002
CENTER OF GRAVITY IN. (MM)
X Y Z
355.6 508.0 241.3
(20.00) (9.50)
355.6 508.0 241.3
(20.00) (9.50)
355.6 508.0 241.3
(20.00) (9.50)