Motorola FR6876 User Manual page 22

FR6800 User Guide
•
Single Slot USB/Serial Cradle
•
Vehicle Cradle.
To charge the main battery:
Connect the charging accessory to the appropriate power source.
1.
Insert the FR6876 into a cradle or attach to a cable. The FR6876 begins charging. The Charging/Battery
2.
Status LED blinks amber while charging, then turns solid green when fully charged. See
charging indications.
The 1950 mAh battery fully charges in approximately five hours and the
approximately seven hours.
LED Charge Indicators
Table 1-2
Charging/Battery
Status LED
Off
Slow Blinking Amber
(1 blink every 2 seconds)
Solid Green
Fast Blinking Red
(2 blinks/second)
FR6876 is not charging.
FR6876 is not inserted correctly in the cradle or connected to a power
source. Charger/cradle is not powered.
FR6876 is charging.
Charging complete.
Note: When the battery is initially inserted in the FR6876, the amber LED
flashes once if the battery power is low or the battery is not fully inserted.
Charging error, e.g.:
•
Temperature is too low or too high.
•
Charging has gone on too long without completion (typically eight hours).
16
Getting Started
Table 1-2
3600 mAh battery charges in
Indication
for