Socks; Axis 231D/232D; Smtp (Email); Snmp - Axis 231D User Manual

AXIS 231D/232D - System Options
40
Maximum bandwidth - Specify, in Mbit/s or kbit/s, the maximum bandwidth that the
network camera is allowed to use on your network. This is a useful function when
connecting your network camera to busy or heavily loaded networks. The default setting is
Unlimited.
Note:
When using MPEG-4 as the video format, remember that setting a maximum bandwidth value here may
create problems for individual video streams if the maximum value is less than the sum of the bit rates set
for the video streams.
For more information, please see the online help

SOCKS

SOCKS is a networking proxy protocol. The AXIS 231D/232D can be configured to use a
SOCKS server to reach networks on the other side of a firewall/proxy server. This
functionality is useful if the Network Dome Camera is located on a local network behind a
firewall, but notifications, uploads, alarms, etc., need to be sent to a destination outside the
local network (e.g. to the Internet).

SMTP (email)

(Simple Mail Transfer Protocol) Enter the host names or addresses for your primary and
secondary mail servers in the fields provided to enable event and error email messages
from the Network Dome Camera to predefined addresses, via SMTP.

SNMP

The Simple Network Management Protocol (SNMP) allows remote management of network
devices. Depending on the level of security required, select the version of SNMP to use. The
three levels of security are:
• SNMP V1 - includes no security.
• SNMP V2c - uses very simple security. The community name can be specified as a pass-
word for read or read/write access to all supported SNMP objects. The community is the
the group of network devices using SNMP.
• SNMP V3 - provides encryption and secure passwords. HTTPS must be enabled.