Radio Shack TAD-1005 Owner's Manual page 23

43-745.fm Page 23 Friday, August 13, 1999 2:16 PM
Problem
The TAD does not
respond to remote
commands.
The TAD sounds three
short beeps when you
access it by remote.
Cause
You entered an incorrect
remote security code.
AC power failure.
The OGM is too short to
allow remote access.
The TAD's memory is full.
Remedy
Carefully re-enter
your remote security
code. If the TAD fails
to respond, the secu-
rity code might have
reset to the default
code. Enter the de-
fault remote security
code (00).
Make sure that AC
power is restored and
the adapter is
9V DC
properly connected to
the TAD and the AC
outlet.
Record a new OGM at
least 2 seconds long.
Erase messages from
the TAD.
23