Management network mapping
All traffic from the service port management interface is routed through the iLO CM management port.
Interfaces
Interfaces are identified by the switch CLI using a unit/slot/port naming convention:
•
The unit number identifies the stack member within a stack of switches.
•
The slot number identifies one of the following:
Internal ports are located on slot 0.
o
External ports are located on slot 1.
o
•
The port identifies the specific physical port or logical interface being managed on a given slot.
To learn more, see switch documentation in the HP Moonshot Networking Library
(http://www.hp.com/go/moonshot/networking).
Network mapping 27