Siemens SITRANS LG250 Operating Instructions Manual page 12

External display and ad-
justment unit with HART
protocol
DIS-ADAPT
Electronics module
12
It is suitable for measured value indication and adjustment of sensors
and is connected to the sensor with a four-wire standard cable up to
50 m (164 ft) long.
You can find additional information in the operating instructions
manual "LG Remote Interface".
The LG Remote Interface is suitable for measured value indication
and adjustment of sensors with HART protocol. It is looped into the
4 ... 20 mA/HART signal cable.
You can find additional information in the operating instructions
manual "LG Remote Interface".
The adapter "DIS-ADAPT" is an accessory part for sensors with dou-
ble chamber housings. It enables the connection of the exterbal dis-
play and adjustment unit to the sensor housing via an M12 x 1 plug.
You can find further information in the supplementary instructions
"Adapter DISADAPT".
The electronics module SITRANS series LG is a replacement part for
TDR sensors of SITRANS series LG. There is a different version avail-
able for each type of signal output.
You can find further information in the operating instructions manual
"Electronics module SITRANS series LG".
SITRANS LG250 - Operating Instructions PBD-51041056