Table of Contents
Advertisement
REMOTE CONTROL
REMOTE BUTTON DESCRIPTIONS
Program the remote to operate
Return to the last channel
viewed. Selects AM/PM in Clock/Timer
Press repeatedly to "Surf" through your
favorite channels list.
CHANNEL (UP/DOWN)
Select next available channel.
UP/DOWN/
LEFT/RIGHT ARROWS
Up/Down arrows
select,
arrows
adjust
Press to show on-screen menus for TV
Selects different picture aspect ratios.
Displays the digital signal strength.
Selects available sound options:
Stereo, Mono, SAP.
Displays the Sleep Timer Menu.
PROGRAMMING THE REMOTE
If you're using Zenith products, the remote is already
programmed for most common codes (TV = 101, VCR =
201, CABLE = 353, DVD = 960, and HD/STB = 800). For
other brands, or if your remote fails to control your Zenith
products, you'll need to program the remote.
Make sure the batteries are installed and follow these
steps for each product:
1. Press the device button to be programmed (CATV,
VCR, DVD, TV, or HD/STB).
2. Press and hold MUTE & FLSHBK. Release MUTE &
FLSHBK after the indicator light turns on.
3. Enter the 3-digit product code from chart on next
page.
4. Press ENTER to save the code.
PV154 - 923-03497
REMOTE CONTROL
PGR (PROGRAM)
PRG
other products.
CABLE
FLASHBK
SURF
menus.
SURF
VOLUME
1
4
and Left/Right
menu options.
7
MENU
0
mode.
MENU
RATIO
RATIO
SIGNAL
RECORD
AUDIO
REWIND
TIMER
MBR-4286
POWER
POWER
LIGHT
VCR
AUX
TV
Lights keys for five seconds.
FLASHBK
MUTE
CABLE/VCR/AUX/TV
Selects remote operating mode.
MUTE
CHANNEL
Turns sound Off/On while the pictures
remains. Press to mute sound, press
VOLUME
again to restore sound.
CHANNEL
VOLUME LEFT/RIGHT
Adjust the sound levels.
2
3
NUMBER KEY PAD
5
6
Selects channels directly and enters
numerical values for some options.
8
9
CHANNEL NUMBER DASH "-"
Selects channel numbers with dashes.
Example: 7-0 selects analog channel 7.
7-1, 7-2, etc
ENTER
ENTER
VIDEO
Goes to menu options and shows the
Channel/Time display. Press after
channel numbers for instant selection.
VIDEO
PAUSE
TIMER
SOURCE
Selects different picture settings.
PLAY
FFWD
QUIT
STOP
Removes menu/display from screen.
CC (Closed Captions)
Selects closed caption display.
SOURCE
Switches between watching TV through
available sources.
5. Point the remote at product and press POWER to test
the product's operation. If it does not turn on, re-
program remote using a different code.
6. Write the codes on the label inside the battery com-
partment for future reference.
NOTE: Use the CABLE device button for satellite receivers.
Use the AUX device button for home audio
components.
1-3
AB - REMOTES
Advertisement
Table of Contents
