MSI X99A WORKSTATION User Manual page 64

CPU Ratio Mode [Dynamic Mode]*
f
Selects the CPU Ratio operating mode. This item will appear when you set the CPU
ratio manually.
[Fixed Mode]
[Dynamic Mode]
CPU Ratio Offset When Running AVX [Auto]
f
Sets a offset value to lower the CPU core ratio. It could be helpful for heat dissipation
when running AVX instruction set. If set to Auto, BIOS will configure this setting
automatically. This item appears when the installed CPU supports this function.
EIST [Enabled]*
f
Enables or disables the Enhanced Intel
[Enabled] Enables the EIST to adjust CPU voltage and core frequency dynamically.
It can decrease average power consumption and average heat
production.
[Disabled] Disables EIST.
Intel Turbo Boost [Enabled]*
f
Enables or disables the Intel
supports this function.
[Enabled] Enables this function to boost CPU performance automatically above
rated specifications when system request the highest performance
state.
[Disabled] Disables this function.
Enhanced Turbo [Auto]
f
Enables or disables Enhanced Turbo function for all CPU cores to boost CPU
performance.
[Auto] This setting will be configured automatically by BIOS.
[Enabled] All CPU cores would be increased to maximum turbo ratio.
[Disabled] Disables this function.
Ring Ratio [Auto]
f
Sets the ring ratio. The valid value range depends on the installed CPU.
Adjusted Ring Frequency
f
Shows the adjusted Ring frequency. Read-only.
CPU Base Clock (MHz) [100]
f
Sets the CPU Base clock. You may overclock the CPU by adjusting this value. Please
note that overclocking behavior and stability is not guaranteed. This item appears
when the installed processor supports this function.
64
BIOS Setup
Fixes the CPU ratio.
CPU ratio will be changed dynamically according to the CPU
loading.
®
Turbo Boost. This item appears when the installed CPU
®
SpeedStep Technology.