BIOS Setting
USB transfer
time-out
Device reset
time-out
Device power-
up delay
'
EB-591LF USER
S MANUAL
Options
-1 sec
-5 sec
-10 sec
-20 sec
-10 sec
-20 sec
-30 sec
-40 sec
-Auto
-Manual
Chapter 4 AMI BIOS Setup
Description/Purpose
Specifies time-out value for Control,
Bulk and Interrupt transfers.
Specifies the value for device reset
timeout.
Specifies maximum time it would take
for USB device to report itself to the
controller. If set to auto, it would use
default values (100 ms for root port)
and value read from hub descriptor in
case of hub port.
Page: 4-15