Select Audio Language; View Teletext Information - JVC LT-42DR9BJ Manual

Select audio language

By default, the language set in "Audio Language" (P. 12) is automatically
selected.
When not broadcast in that language, another broadcast language is
automatically selected.
Switch to another language
Audio Selection
English
Gaelic
Welsh
: Special audio track for the visually impaired
Undefined: When the audio's language cannot be identified
Dolby: Dolby Digital
The language that can be selected depends on the broadcast.
Please read ""Dolby Digital" output from the DIGITAL AUDIO OUT
terminal" (P. 18) before selecting "Dolby".
A select
B set

View teletext information

Enter the Operate according to the screen indications.
Teletext mode
You can use the buttons shown below.
(red) (green) (yellow) (blue)
A select
B set
5