Disassembly Requirements; System Disassembly; Chapter 3 System Disassembly - Acer Aspire X3910 Service Manual

System Disassembly

This chapter contains step-by-step procedures on how to disassemble the desktop computer for maintenance
and troubleshooting.

Disassembly Requirements

To disassemble the computer, you need the following tools:
Wrist grounding strap and conductive mat for preventing electrostatic discharge
•
Flat-blade screwdriver
•
Philips screwdriver
•
Hex screwdriver
•
Plastic flat-blade screwdriver
•
Plastic tweezers
•
NOTE: The screws for the different components vary in size. During the disassembly process, group the
screws with the corresponding components to avoid mismatch when putting back the components.
NOTE: The disassembling instruction below is based on an X3810 sample. You will see a slightly difference
between an actual X3910 system and some images hereafter.
Chapter 3
Chapter 3
27