Date Adjustment At The End Of The Month; How To Use The Chronograph（Ne88; How To Use The Chronograph; [Standard Measurement] - Seiko Issey Miyake NE15 Instruction

Push the crown back in to the normal position in ac-
cordance with a time signal.
※ The telephone time signal service is helpful for setting the second
hand exactly.
○ The mechanism of mechanical watches is different
from that of quartz watches.
When setting the time, be sure to turn back the
minute hand a little behind the desired time and then
advance it to the exact time.
14
How to use the chronograph （NE88）

■ How to use the chronograph

The chronograph can measure up to 12 hours.
※ "Chronograph" refers to a watch function that measures the elapsed
time while indicating the current time.
※ Before using the stopwatch, be sure to check that the center stop-
watch hand is at "0" position. If not, press button Ⓑ to reset it to "0" po-
sition.
※ Before using the stopwatch, be sure to check that the watch is wound
up sufficiently. If the power reserve indicator indicates less than 10
hours of power reserve, the stopwatch cannot be used.
stopwatch
minute hand
stopwatch hour
hand
(Ex.: 6 hours 20 minutes 10 seconds)
16
First click
Normal Second
Position click
CAUTION
ButtonA
Start/stop of the
stopwatch
Center stopwatch
hand
ButtonB
Reset of the stop-
watch

■ Date adjustment at the end of the month

It is necessary to adjust the date at the end of February
and 30-day months.
Ex.) To adjust the date in the A.M. period on the first
day of a month following a 30-day month
・ The watch displays "31" instead of "1". Unscrew the
crown by turning it counterclockwise, and then, pull it
out to the fi rst click.
・ Turn the crown to set the date to "1" and then push
the crown back in to the normal position.
・ While pressing the crown, turn it clockwise until it
locks in place.
CAUTION
○ Do not set the date between 8:00 p.m. and 2:00 a.m.
as this will cause a malfunction.

[Standard measurement]

Press the buttons in the following order:A → A → B
START STOP
ButtonA
(6 hours 20 minutes 10 seconds)
・ Press button A to ・ Press button A
start the chrono- again to stop the
graph. The center chronograph.The
stopwatch hand stopwatch hands
will start moving. stop to indicate
the elapsed time.
15
RESET
ButtonA
ButtonB
・ Press button B to
reset the chrono-
g r a p h . A l l t h e
stopwatch hands
will be reset to "0"
position.
17