Connect your Cameras
To connect your camera(s) to the NVR, simply connect the supplied Ethernet cable to the LAN connection on the
camera then plug the other end of the Ethernet cable into one of the camera inputs on the back of the NVR.
It doesn't really matter which port you use as they are quite versatile and will be configured in a later step. Please note;
the Ethernet cable is the same at both ends so it doesn't matter which end plugs into the camera or NVR.
AUDIO
DC 48V
USB
OUT
DC Power (optional)
Reset Button
eSATA
HDMI
VGA
LAN
1
3
5
7
2
4
6
8
4