Table of Contents
Advertisement
Operating the appliance
en
1
Operating the
appliance
Preparing the washing
O p e r a t i n g t h e a p p l i a n c e
machine
The washing machine must be
Note:
correctly installed and connected.
~ Page 12
Plug into the mains.
1.
Turn on the tap.
2.
Open the washing machine door.
3.
Check that the drum is completely
4.
drained. Drain if necessary.
Select programme/switch on
the appliance
If you have activated the
Note:
childproof lock, you must first deactivate
it before you can set a program.
Use the program selector to select the
required program. Can be rotated in
either direction.
The appliance is switched on.
The program default settings for the
selected program appear in the display
panel:
Temperature
*
,
■
The maximum load and the duration
■
of the program (alternately)
Energy consumption*.
■
*
Depending on the model
26
Change the programme
default settings
You can use the default settings for
each wash cycle or change them.
To do this, repeatedly press the
corresponding button until the required
setting is displayed.
The settings are activated without
needing to be confirmed.
The settings are not saved after
switching off the washing machine.
Default program settings~ Page 24
Select additional programme
settings
By selecting additional settings, you can
better adapt the washing process to
your items of laundry.
The settings can be selected or
deselected depending on the program
progress.
The button indicator lamps light up if a
setting is activated.
The settings are not saved after
switching off the washing machine.
Additional program settings
~ Page 25
Placing laundry into the drum
:
Warning
Danger of death!
Items of laundry pretreated with
cleaning agents that contain solvents,
e.g. stain remover/cleaning solvent,
may cause an explosion after being
loaded into the washing machine.
Hand-rinse these items of laundry
thoroughly beforehand.
Advertisement
Table of Contents
