Combination Nozzle; Telescopic Tube - Philips FC8732 User Manual

supervision or instruction concerning use of the appliance by a person responsible for their
safety.
- Children should be supervised to ensure that they do not play with the appliance.
- Do not point the hose, the tube or any other accessory at the eyes or ears nor put it in your
mouth when it is connected to the vacuum cleaner and the vacuum cleaner is switched on.
Caution
- Keep the appliance out of the reach of children.
- Do not suck up large objects as this may cause the air passage in the tube or hose to become
obstructed.
- Never use the appliance without the motor protection filter. This could damage the motor and
shorten the life of the appliance.
- Only use the Philips filter cylinder supplied with the appliance.
Electromagnetic fields (EMF)
This Philips appliance complies with all standards regarding electromagnetic fields (EMF). If handled
properly and according to the instructions in this user manual, the appliance is safe to use based on
scientific evidence available today.
Preparing for use
Connecting accessories
hose
1 To connect the hose, insert the hose fastening hook into the opening (1) and then push the
hose connector downwards ('click') () (Fig. ).
 To disconnect the hose, press the release buttons (1) and pull the hose connector out of the
hose connection opening (). (Fig. )

Telescopic tube

1 To connect the tube to the handgrip of the hose, press the spring-loaded lock button on the
handgrip and insert the handgrip into the tube. Fit the spring-loaded lock button into the
opening in the tube ('click') (Fig. ).
 To disconnect the tube from the handgrip, press the spring-loaded lock button and pull the
handgrip out of the tube.
Use the same method to connect and disconnect the nozzles.
 Adjust the tube to the length you find most comfortable during vacuum cleaning. Push the
slide downwards (1) with one hand and pull the upper part of the tube upwards or push it
downwards () with the other hand (Fig. 5).

Combination nozzle

You can use the combination nozzle on carpets (with the brush strips folded in) or on hard floors
(with the brush strips folded out).
1 (Fig. 6)
To clean hard floors, push the rocker switch on top of the combination nozzle with your foot. The
brush strips come out of the nozzle housing.
 To clean carpets, push the rocker switch again to make the brush strips disappear into the
nozzle housing again. (Fig. 7)
English
7