ABB ACS150 User Manual page 12

10
Parameters
Index Name/Selection
-1000...1000%
4020 ACT2 MINIMUM
-1000...1000%
4021 ACT2 MAXIMUM
-1000...1000%
4022 SLEEP SELECTION
NOT SEL
DI1
DI2
DI3
DI4
DI5
INTERNAL
DI1(INV)
DI2(INV)
DI3(INV)
DI4(INV)
DI5(INV)
4023 PID SLEEP LEVEL
Update notice
Description
Value in percent
See parameter 4018 ACT1 MINIMUM.
See parameter 4018.
See parameter 4019 ACT1 MAXIMUM.
See parameter 4019.
Activates the sleep function and selects the source for the activation input.
No sleep function selected
The function is activated/deactivated through digital input DI1.1 = activation,
0 = deactivation.
The internal sleep criteria set by parameters
4025 WAKE-UP DEV are not effective. The sleep start and stop delay
parameters 4024 PID SLEEP DELAY and
effective.
See selection DI1.
See selection DI1.
See selection DI1.
See selection DI1.
Activated and deactivated automatically as defined by parameters
SLEEP LEVEL and 4025
The function is activated/deactivated through inverted digital input DI1.
1 = deactivation, 0 = activation.
The internal sleep criteria set by parameters
4025 WAKE-UP DEV are not effective. The sleep start and stop delay
parameters 4024 PID SLEEP DELAY and
effective.
See selection DI1(INV).
See selection DI1(INV).
See selection DI1(INV).
See selection DI1(INV).
Defines the start limit for the sleep function. If the motor speed is below a set
level (4023) longer than the sleep delay (4024), the drive shifts to the
sleeping mode: The motor is stopped and the control panel shows alarm
message PID SLEEP (code: A2018).
Parameter 4022 SLEEP SELECTION must be set to 7 (INTERNAL).
PID output level
4023
PID process feedback
PID reference
4023 PID SLEEP LEVEL and
4026 WAKE-UP DELAY are
WAKE-UP DEV.
4023 PID SLEEP LEVEL and
4026 WAKE-UP DELAY are
t < 4024
t > 4024
4025
Stop
Start
Def
0%
100%
0 = NOT SEL
0
1
2
3
4
5
4023 PID 7
-1
-2
-3
-4
-5
0.0 Hz
t
4026
t