–
Clean and grease the wheel spindle.
Long-life grease (
–
Jack up the front wheel into the fork, position it, and insert
the wheel spindle.
–
Mount and tighten screw
Guideline
Screw, front wheel
spindle
S01004-10
–
Position wheel speed sensor
–
Mount and tighten screw
Guideline
Screw, wheel speed
sensor
–
Position the brake caliper on the brake disc.
The brake linings are correctly positioned.
–
Position spacers
yet.
–
Operate the hand brake lever repeatedly until the brake lin-
ings are in contact with the brake disc and there is a pressure
point. Fix the hand brake lever in the activated position.
The brake caliper straightens.
–
Tighten screws
WHEELS, TIRES 14
p. 260)
2
.
M24x1.5
45 Nm (33.2 lbf ft)
3
in the drill hole.
4
.
M6
6 Nm (4.4 lbf ft)
5
6
. Mount screws
but do not tighten
6
.
153