12 SERVICE WORK ON THE CHASSIS
104
Main work
–
Move the handlebar to the straight-ahead position. Move the
fork legs to and fro in the direction of travel.
Play should not be detectable on the steering head bear-
ing.
»
If there is detectable play:
–
Adjust the steering head bearing play.
–
Move the handlebar to and fro over the entire steering range.
400738-11
It must be possible to move the handlebar easily over the
entire steering range. There should be no detectable detent
positions.
»
If detent positions are detected:
–
Adjust the steering head bearing play.
–
Check the steering head bearing and change if neces-
sary.
Finishing work
–
Release the rear of the vehicle.
–
Remove the motorcycle from the work stand.
(
p. 105)
(
p. 105)